Above Ground Hydrant DN80 Type ’’MT-C2’’
Features:
• Vertical installation of water or fire installation.
• Automatic discharge after use.
• Surface corrosion protection with externally and
internally applied epoxy coating with minimal
thickness of 250μm in accordance with EN 14901:2014
• Working pressure PN16.
• Connecting flange in accordance wirh EN 1092-2.
• Aluminum couplings
DOWNLOAD SPECIFICATIONS (PDF)
Above Ground Hydrant DN80 Type ’’МТ-Inx3’’
Features:
• Vertical installation of water or fire installation.
• Automatic discharge after use.
• Surface corrosion protection with externally and
internally applied epoxy coating with minimal
thickness of 250μm in accordance with EN
14901:2014, RAL 3000
• Working pressure PN16.
• Connecting flange in accordance with EN 1092-2.
• Aluminum couplings
DOWNLOAD SPECIFICATIONS (PDF)
Aboveground hydrant DN80 type МТ-INX4 – breakable
Features:
• Vertical installation of water or fire installation.
• Automatic discharge after use.
• Surface corrosion protection with externally and
internally applied epoxy coating with minimal
thickness of 250μm in accordance with EN
14901:2014, RAL 3000
• Working pressure PN16.
• Connecting flange in accordance with EN 1092-2.
• Aluminum couplings
Coupling with restrains against pull-out
Code No. АТА 07264
Features
- For installation on cast iron / ductile, steel, Asbestos-cement, PE and PVC pipes
- Produced in accordance with EN 14525: 2004
- The body, closing ring and clamps made of hot rolled structural steel in accordance with EN 10025- 2:2019 or ductile iron in accordance with EN 1563:2018
- Epoxy paint surface protection of min 250 μm in accordance with EN 14901:2014 or black thermoplastic confirmed by an accredited laboratory issued health safety report
- Operating pressure PN10, PN16, PN25
- Galvanized steel or cast-iron pull-out clamps
- EPDM rubber seal in accordance with the EN 681-1:1996 with an accredited laboratory issued health safety certificate
- Angle deviation (deflection) 3°
Decorative water drinking fountain Type Antonia
Features:
• Baroque style shaped
• Self closing push button – high gloss brass faucet or classic tap with
½” connection to a flexible water pipe
• Epoxy coated 250µm, RAL 9005; 6002; 6010 – UV stabilized
• Grey iron casting GG20, standard EN 1561:2011, casting thickness
min 8mm
• Field of application - water drinking fountain for public use in parks,
gardens, town squares
DOWNLOAD SPECIFICATIONS (PDF)
Dismantling joint type MDK A
• Dimension Range: DN50 to DN2000.
• Working Pressure: PN10, PN16, PN25, PN40
• Pressure test in accordance with EN 12266-1:2012
• Flange Drilling: EN 1092-2:1997 оr EN 1092-
1:2007+A1:2013
• Epoxy paint surface protection of min 250 μm in accordance
with min 250μm according EN 14901:2014 or thermoplastic
confirmed By an accredited laboratory issued health
inspection certificate
• Sealing ring made by EPDM in accordance with EN 681-
1:1996/A3:2005
Ductile iron double band repair clamp
Features:
• Body produced from ductile iron in accordance with EN1563:2018
• Epoxy coating protection of min. 250μm in accordance with
EN14901:2014 or black thermoplastic confirmed by health
inspection certificate
• PN16 working pressure
• Equipped with steel zinc coated bolts, nuts and washers
• EPDM rubber seal in accordance with EN 681-1:1996
• Ductile Repair Clamps are intended for permanent repair of pipes
from various materials
DOWNLOAD SPECIFICATIONS (PDF)
DVV – Automatic air valve with twoo balls
Features
• Design: EN 1074-4:2000
• Available range of DN sizes DN 50
to DN 200.
• Epoxy coated from the inside and
outside, min 250 μm in accordance
with EN 14901:2014
• Product color: Blue RAL 5005.
• Working pressure PN10 and PN16.
• Discharge of large amounts of air
when filling a pipeline
• Discharge of small amounts of air
during the operation of the pressure
pipeline
• Entrance of large amounts of air
when emptying a pipeline
DOWNLOAD SPECIFICATIONS (PDF)
F – Flanged pipe
All cast iron pipe pieces are made in accordance with EN 545, which specifies the material, mechanical features, measurements, permitted tolerance and protection of all parts.
These ductile iron products are intended for a working pressure of 10 bar
and 16 bar. The protective layer of these ductile iron pipe fittings is made
with a health friendly material.
These fittings attach to the flanges with the help of screws.
Epoxy paint surface protection of min 250μm in accordance with EN
14901:2014 or thermoplastic confirmed by an accredited laboratory issued health inspection certificate
DOWNLOAD SPECIFICATIONS (PDF)
Flangе adaptor with restrains against pull-out
• For installation on cast iron / ductile, steel, Asbestos cement, PE
and PVC pipes
• Produced in accordance with EN 14525: 2004
• The body, closing ring and clamps made of hot rolled structural
steel ST235JR standard EN 10025-2:2019 or ductile iron in
accordance with EN 1563:2018
• Epoxy paint surface protection of min 250 μm in accordance with
EN 14901:2014 or thermoplastic in black or blue (Rilsan Nylon 11
or equivalent), confirmed by an accredited laboratory issued health
safety report
• Operating pressure PN10, PN16, PN25
• Connecting dimensions in accordance with EN 1092-
1:2007+a1:2013/AC:2014 or EN 1092-2:1997
• Galvanized steel or cast-iron pull-out clamps
• EPDM rubber seal in accordance with the EN 681-1:1996
• A3:2005 with an accredited laboratory issued health safety
certificate
• Angle deviation (deflection) 3°
Flexible telescopic dismantling joint type “MDK-FLEX“
• Dimension Range: DN50 to DN600.
• Working Pressure: PN10, PN16 and PN25
• Pressure test in accordance with EN 12266-1:2012
• Flange Drilling: EN 1092-2:1997 оr EN 1092-1:2007+A1:2013
• Epoxy coating surface protection of min 250μm in accordance
withEN 14901:2014 or thermoplastic confirmed with an
accredited laboratory health inspection certificate
• Sealing ring made of EPDM in accordance with EN 681-
1:1996/A3:2005
HDPE adaptor flange
Features
• Material: PE100
• Outstanding flexibility.
• Safe and easy attachment
by butt welding.
• High impact resistance
even at very low
temperatures
DOWNLOAD SPECIFICATIONS (PDF)
HDPE Elbow 45
Features
• Material: PE100
• Outstanding flexibility.
• Safe and easy attachment by butt welding.
• High impact resistance even at very low
temperatures
DOWNLOAD SPECIFICATIONS (PDF)
HDPE Elbow 90
Features
• Material: PE100
• Outstanding flexibility.
• Safe and easy attachment by butt welding.
• High impact resistance even at very low
temperatures
DOWNLOAD SPECIFICATIONS (PDF)
HDPE End Cap
Features
• Material: PE100
• Outstanding flexibility.
• Safe and easy attachment by butt welding.
• High impact resistance even at very low
temperatures
DOWNLOAD SPECIFICATIONS (PDF)
HDPE Reducer
Features
• Material: PE100
• Outstanding flexibility.
• Safe and easy attachment by butt welding.
• High impact resistance even at very low temperatures
DOWNLOAD SPECIFICATIONS (PDF)
HDPE Tees
Features
• Material: PE100
• Outstanding flexibility.
• Safe and easy attachment by butt
welding.
• High impact resistance even at
very low temperatures
DOWNLOAD SPECIFICATIONS (PDF)
HDPE Tees reduced
Features
• Material: PE100
• Outstanding flexibility.
• Safe and easy attachment by butt welding.
• High impact resistance even at very low temperatures
DOWNLOAD SPECIFICATIONS (PDF)
Inlet strainer without valve
Features
• Body Ductile iron or steel
body.
• Working Pressure: PN10,
PN16.
• Available range: DN 50-500.
• Epoxy coated from the inside
and outside, min 250 μm
• Product color: Blue RAL
5005
DOWNLOAD SPECIFICATIONS (PDF)
Loose steel flange for HDPE
Features
• For polyethylene stub
ends.
• Material: Steel S235JR.
• Working Pressure: PN10,
PN16, PN25 and PN40.
• Protection: zinc plated,
epoxy coated or
thermoplastic.
• Dimensions in accordance
with EN 1092-1+A1:2013/
AC:201
DOWNLOAD SPECIFICATIONS (PDF)
Manhole cover – type medium
Features
Material: EN124, Ductile iron GJS,
bitumen coated
Capacity: Class B125(150), in
accordance with EN 124
Purpose: To close the sewage shafts,
etc.
Usage: On sidewalks, pedestrian
walks, bicycle paths or parking for light
vehicles
Versions: Fixed
DOWNLOAD SPECIFICATIONS (PDF)
Manhole cover for watermeter
Features
Material: Ductile iron GJS, bitumen coated
Capacity: Class A15, in accordance with
EN 124
Purpose: Closure of shafts for water
meters or house connections with
waterline
Usage: On sidewalks, pedestrian walks,
bicycle paths and parks
Versions: Fixed
DOWNLOAD SPECIFICATIONS (PDF)
Manhole cover without openings
Features
Material: Ductile iron GJS, bitumen coated
Capacity: Class C250 и D 400, in accordance with EN 124
Purpose: To close sewage shafts, with intensive and regular
access, frequent openings
Usage: For streets with high traffic intensity of regular and
heavy vehicles, with normal speed
Versions: Fixed with openings and without openings. With/
without automatic closin
DOWNLOAD SPECIFICATIONS (PDF)
Max coupling
Features:
• Body and end ring made of ductile iron
material EN-GJS-500 (GGG 50) in
accordance with EN 1563:2018 standard
(optional body and end caps from hot
rolled structural steel)
• Couplings produced in accordance with
EN 14525:2004
• Protection with epoxy coating or black
thermoplastic coating confirmed by a
health inspection certificate
• PN16 working pressure.
• Equipped with steel zinc coated bolts,
nuts and washers
• EPDM rubber seals in accordance with EN
681- 1:1996
• High Tolerance mechanical pipe fittings.
• Angular deflection +/- 6
DOWNLOAD SPECIFICATIONS (PDF)
Max Flange adaptor
Features:
• Body and end rings are made оf ductile
iron material EN-GJS-500 (GGG 50) in
accordance with EN 1563:2018 standard
(optional body and end cap from hot
rolled structural steel)
• Flange Adaptors are produced in
accordance with EN 14525:2004
• Surface protection by epoxy coating or
black thermoplastic coating confirmed
by health inspection certificate
• PN10, PN16 working pressure.
• Flanges in accordance with EN1092-
2:1997
• Equipped with steel zinc plated bolts,
nuts and washers
• EPDM rubber seals in accordance with
EN 681-1:1996
• High Tolerance mechanical pipe fittings.
• Angular deflection +/- 4⁰
DOWNLOAD SPECIFICATIONS (PDF)