Прикажувам 1–9 од 61 резултати

Прикажи 9 24 36

Above Ground Hydrant DN80 Type ’’MT-C2’’

Features: • Vertical installation of water or fire installation. • Automatic discharge after use. • Surface corrosion protection with externally and internally applied epoxy coating with minimal thickness of 250μm in accordance with EN 14901:2014 • Working pressure PN16. • Connecting flange in accordance wirh EN 1092-2. • Aluminum couplings ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Above Ground Hydrant DN80 Type ’’МТ-Inx3’’

Features: • Vertical installation of water or fire installation. • Automatic discharge after use. • Surface corrosion protection with externally and internally applied epoxy coating with minimal thickness of 250μm in accordance with EN 14901:2014, RAL 3000 • Working pressure PN16. • Connecting flange in accordance with EN 1092-2. • Aluminum couplings ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Aboveground hydrant DN80 type МТ-INX4 – breakable

Features: • Vertical installation of water or fire installation. • Automatic discharge after use. • Surface corrosion protection with externally and internally applied epoxy coating with minimal thickness of 250μm in accordance with EN 14901:2014, RAL 3000 • Working pressure PN16. • Connecting flange in accordance with EN 1092-2. • Aluminum couplings

Coupling with restrains against pull-out

Code No. АТА 07264

Features

  • For installation on cast iron / ductile, steel, Asbestos-cement, PE and PVC pipes
  • Produced in accordance with EN 14525: 2004
  • The body, closing ring and clamps made of hot rolled structural steel in accordance with EN 10025- 2:2019 or ductile iron in accordance with EN 1563:2018
  • Epoxy paint surface protection of min 250 μm in accordance with EN 14901:2014 or black thermoplastic confirmed by an accredited laboratory issued health safety report
  • Operating pressure PN10, PN16, PN25
  • Galvanized steel or cast-iron pull-out clamps
  • EPDM rubber seal in accordance with the EN 681-1:1996 with an accredited laboratory issued health safety certificate
  • Angle deviation (deflection) 3°
ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Decorative water drinking fountain Type Antonia

 Features: • Baroque style shaped • Self closing push button – high gloss brass faucet or classic tap with ½” connection to a flexible water pipe • Epoxy coated 250µm, RAL 9005; 6002; 6010 – UV stabilized • Grey iron casting GG20, standard EN 1561:2011, casting thickness min 8mm • Field of application - water drinking fountain for public use in parks, gardens, town squares ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Dismantling joint type MDK A

• Dimension Range: DN50 to DN2000. • Working Pressure: PN10, PN16, PN25, PN40 • Pressure test in accordance with EN 12266-1:2012 • Flange Drilling: EN 1092-2:1997 оr EN 1092- 1:2007+A1:2013 • Epoxy paint surface protection of min 250 μm in accordance with min 250μm according EN 14901:2014 or thermoplastic confirmed By an accredited laboratory issued health inspection certificate • Sealing ring made by EPDM in accordance with EN 681- 1:1996/A3:2005  ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Ductile iron double band repair clamp

Features: • Body produced from ductile iron in accordance with EN1563:2018 • Epoxy coating protection of min. 250μm in accordance with EN14901:2014 or black thermoplastic confirmed by health inspection certificate • PN16 working pressure • Equipped with steel zinc coated bolts, nuts and washers • EPDM rubber seal in accordance with EN 681-1:1996 • Ductile Repair Clamps are intended for permanent repair of pipes from various materials ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

DVV – Automatic air valve with twoo balls

Features • Design: EN 1074-4:2000 • Available range of DN sizes DN 50 to DN 200. • Epoxy coated from the inside and outside, min 250 μm in accordance with EN 14901:2014 • Product color: Blue RAL 5005. • Working pressure PN10 and PN16. • Discharge of large amounts of air when filling a pipeline • Discharge of small amounts of air during the operation of the pressure pipeline • Entrance of large amounts of air when emptying a pipeline ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)