Above Ground Hydrant DN80 Type ’’MT-C2’’
Features:
• Vertical installation of water or fire installation.
• Automatic discharge after use.
• Surface corrosion protection with externally and
internally applied epoxy coating with minimal
thickness of 250μm in accordance with EN 14901:2014
• Working pressure PN16.
• Connecting flange in accordance wirh EN 1092-2.
• Aluminum couplings
DOWNLOAD SPECIFICATIONS (PDF)
Above Ground Hydrant DN80 Type ’’МТ-Inx3’’
Features:
• Vertical installation of water or fire installation.
• Automatic discharge after use.
• Surface corrosion protection with externally and
internally applied epoxy coating with minimal
thickness of 250μm in accordance with EN
14901:2014, RAL 3000
• Working pressure PN16.
• Connecting flange in accordance with EN 1092-2.
• Aluminum couplings
DOWNLOAD SPECIFICATIONS (PDF)
Aboveground hydrant DN80 type МТ-INX4 – breakable
Features:
• Vertical installation of water or fire installation.
• Automatic discharge after use.
• Surface corrosion protection with externally and
internally applied epoxy coating with minimal
thickness of 250μm in accordance with EN
14901:2014, RAL 3000
• Working pressure PN16.
• Connecting flange in accordance with EN 1092-2.
• Aluminum couplings
Coupling with restrains against pull-out
Code No. АТА 07264
Features
- For installation on cast iron / ductile, steel, Asbestos-cement, PE and PVC pipes
- Produced in accordance with EN 14525: 2004
- The body, closing ring and clamps made of hot rolled structural steel in accordance with EN 10025- 2:2019 or ductile iron in accordance with EN 1563:2018
- Epoxy paint surface protection of min 250 μm in accordance with EN 14901:2014 or black thermoplastic confirmed by an accredited laboratory issued health safety report
- Operating pressure PN10, PN16, PN25
- Galvanized steel or cast-iron pull-out clamps
- EPDM rubber seal in accordance with the EN 681-1:1996 with an accredited laboratory issued health safety certificate
- Angle deviation (deflection) 3°
Decorative water drinking fountain Type Antonia
Features:
• Baroque style shaped
• Self closing push button – high gloss brass faucet or classic tap with
½” connection to a flexible water pipe
• Epoxy coated 250µm, RAL 9005; 6002; 6010 – UV stabilized
• Grey iron casting GG20, standard EN 1561:2011, casting thickness
min 8mm
• Field of application - water drinking fountain for public use in parks,
gardens, town squares
DOWNLOAD SPECIFICATIONS (PDF)
Dismantling joint type MDK A
• Dimension Range: DN50 to DN2000.
• Working Pressure: PN10, PN16, PN25, PN40
• Pressure test in accordance with EN 12266-1:2012
• Flange Drilling: EN 1092-2:1997 оr EN 1092-
1:2007+A1:2013
• Epoxy paint surface protection of min 250 μm in accordance
with min 250μm according EN 14901:2014 or thermoplastic
confirmed By an accredited laboratory issued health
inspection certificate
• Sealing ring made by EPDM in accordance with EN 681-
1:1996/A3:2005
Ductile iron double band repair clamp
Features:
• Body produced from ductile iron in accordance with EN1563:2018
• Epoxy coating protection of min. 250μm in accordance with
EN14901:2014 or black thermoplastic confirmed by health
inspection certificate
• PN16 working pressure
• Equipped with steel zinc coated bolts, nuts and washers
• EPDM rubber seal in accordance with EN 681-1:1996
• Ductile Repair Clamps are intended for permanent repair of pipes
from various materials
DOWNLOAD SPECIFICATIONS (PDF)
DVV – Automatic air valve with twoo balls
Features
• Design: EN 1074-4:2000
• Available range of DN sizes DN 50
to DN 200.
• Epoxy coated from the inside and
outside, min 250 μm in accordance
with EN 14901:2014
• Product color: Blue RAL 5005.
• Working pressure PN10 and PN16.
• Discharge of large amounts of air
when filling a pipeline
• Discharge of small amounts of air
during the operation of the pressure
pipeline
• Entrance of large amounts of air
when emptying a pipeline
DOWNLOAD SPECIFICATIONS (PDF)