Showing 46–54 од 61 results

Steel Max coupling for large diameters

Features: • Body and end ring made of hot rolled products of structural steel St235JR in accordance with EN 10025-2:2019 or ductile iron in accordance with EN 1563:2018 • Couplings produced in accordance with EN 14525:2004 • Protection with epoxy coating in accordance with EN 14901:2014 or black thermoplastic coating confirmed by health inspection certificate • PN16 working pressure • Equipped with steel zinc coated bolts, nuts and washers • EPDM rubber seal in accordance with EN 681- 1:1996 • High tolerance mechanical pipe fitings DOWNLOAD SPECIFICATIONS (PDF)

Steel max flange adapter for large diameters

Features: • Body and end ring made of hot rolled products of structural steel ST235JR in accordance with EN 10025-2:2019 оr ductile iron in accordance with EN 1563:2018 • Flange Adaptors produced in accordance with EN 14525:2004 • Epoxy coating protection in accordance with EN 14901:2014 or black thermoplastic coating confirmed by health inspection certificate • PN10, PN16 working pressure • Connecting dimensions in accordance with EN 1092- 1:2007+a1:2013/AC:2014 or EN 1092-2:1997 • Equipped with steel zinc coated bolts, nuts and washers • EPDM rubber seal in accordance with EN 681-1:1996 • High tolerance mechanical pipe fitting DOWNLOAD SPECIFICATIONS (PDF)

Strained Flange Adapter for HDPE and PVC pipe

Features: • Body and end rings are made of ductile iron material EN- GJS-500 (GGG 50) in accordance with EN 1563:2018 standard • Flange Adaptоrs produced in accordance with EN 14525:2004 • Epoxy coating protection in accordance with EN14901:2014 or black color thermoplastic coating confirmed by health inspection certificate • PN10, PN16 working pressure. • Flanges in accordance with EN1092- 2:1997 • Equipped with steel zinc plated bolts, nuts and washers • EPDM rubber seals in accordance with EN 681-1:1996 • Angular deflection +/- 3.5⁰ DOWNLOAD SPECIFICATIONS (PDF)

Swing check valve

Features • Rubber encapsulated disc. • Suitable for both horizontal and vertical installation. • Working Pressure: PN10, PN16. • Available range: DN 50-300. • Epoxy coated from the inside and outside, min 250 μm in accordance with EN 14901:2014 • Product color: Blue RAL 5005. DOWNLOAD SPECIFICATIONS (PDF)

Telescopic service spindle

Features • Allows valve opening and closing • Easy to install without special tools • Protection against dirt • Adjustable in any position within the range, and self-holding • The protective tube, cap and clutch between the telescopic parts are integrated in a stable assembly • With ranges from 0,7 to 2,5 m DOWNLOAD SPECIFICATIONS (PDF)

Tensile Restrained Coupling for HDPE and PVC pipe

Features: • Body and end ring are made of ductile iron material EN-GJS-500 (GGG • 50) in accordance with EN 1563:2018 • Couplings for PE and PVC produced in accordance with EN 14525:2004 • Protection by epoxy coating or thermoplastic coating in accordance with EN 14901:2014 or black color confirmed by health inspection certificate • PN16 working pressure. • Equipped with steel zinc plated bolts, nuts and washers • EPDM rubber seals in accordance with EN 681-1:1996 • High Tolerance mechanical pipe fittings • Angular deflection +/- 4⁰ DOWNLOAD SPECIFICATIONS (PDF)

Two part tapping saddle for PE-PVC pipes for tapping at full operating pressure

Features • For installation on PE and PVC pipes • For horizontal or vertical installation • Operating pressure PN16 bar, hydraulically tested in accordance with EN12266-1: 2012 • Body made of ductile iron EN-GJS-500-7 in accordance with EN 1563:2018 • Epoxy paint surface protection of min 250μm in accordance with EN 14901:2014 or thermoplastic confirmed by an accredited laboratory issued health inspection certificate EPDM rubber seals in accordance with EN 681-1:1996/A3:2005 confirmed with an accredited laboratory issued health inspection certificate • Connector with internal female thread G1”, G1½” and G2” in accordance with EN 10226- 1:2004 • Additional material coupled with connection to PE hose min. Ø32 made of brass. The thread of the additional material is in accordance with the ICC EN 10226-1:2004 and is designed for a working pressure of 16 bar • Telescopic extension spindle with ranges from 0,7 m to 2,5 m made of PVC and galvanized steel with epoxy protected or galvanized coupling elements DOWNLOAD SPECIFICATIONS (PDF)