Fittings for connection with pipes

Тwo-part tapping saddle for pe/pvc pipes for tapping at full operating pressure, with extra joint material and telescopic spindle

Code No. ATA 07322

Features

  • For installation on PE and PVC pipes
  • For horizontal or vertical installation
  • Operating pressure PN16 bar, hydraulically tested in accordance with EN12266-1: 2012
  • Body made of ductile iron EN-GJS-500-7 in accordance with EN 1563:2018
  • Epoxy paint surface protection of min 250μm in accordance with EN 14901:2014 or thermoplastic confirmed by an accredited laboratory issued health inspection certificate EPDM rubber seals in accordance with EN 681-1:1996/A3:2005 confirmed with an accredited laboratory issued health inspection certificate
  • Connector with internal female thread G1”, G1½” and G2” in accordance with EN 10226-1:2004
  • Additional material coupled with connection to PE hose min. Ø32 made of brass. The thread of the additional material is in accordance with the ICC EN 10226-1:2004 and is designed for a working pressure of 16 bar
  • Telescopic extension spindle with ranges from 0,7 m to 2,5 m made of PVC and galvanized steel with epoxy protected or galvanized coupling elements

Technical description:

 Download Two-part tapping saddle for pe/pvc pipes for tapping at full operating pressure, with extra joint material and telescopic spindle