Underground Hydrant DN80 Type “ATA-T2”
Features:
• Design in accordance with EN 1074- 6:2008:,
• Body, claw, cap and cone made of ductile iron
EN-GJS-400-15 (GGG40) or EN-GJS-500-7
(GGG50) in accordance with EN 1563:2011.
• Flange dimensions in accordance with EN
1092-2:1997
• Hydraulically tested in accordance with EN
12266-1:2012 with an accredited laboratory
issued report.
• With ball safety system for automatic closing
and single or double automatic outlet for
faster water draining
• Stainless steel spindle fixed with brass nut
and o-rings
• All elastomeric seals for underground
hydrants that come in contact with water are
made of EPDM material (antibacterial rubber)
in accordance with EN 681-1:1996/A3:2005
with an accredited laboratory issued hygiene
certificate.
• Surface corrosion protection with externally
and internally applied epoxy coating with
minimal thickness of 250μm in accordance
with EN 14901:2014DOWNLOAD SPECIFICATIONS (PDF)
• Design in accordance with EN 1074- 6:2008:,
• Body, claw, cap and cone made of ductile iron
EN-GJS-400-15 (GGG40) or EN-GJS-500-7
(GGG50) in accordance with EN 1563:2011.
• Flange dimensions in accordance with EN
1092-2:1997
• Hydraulically tested in accordance with EN
12266-1:2012 with an accredited laboratory
issued report.
• With ball safety system for automatic closing
and single or double automatic outlet for
faster water draining
• Stainless steel spindle fixed with brass nut
and o-rings
• All elastomeric seals for underground
hydrants that come in contact with water are
made of EPDM material (antibacterial rubber)
in accordance with EN 681-1:1996/A3:2005
with an accredited laboratory issued hygiene
certificate.
• Surface corrosion protection with externally
and internally applied epoxy coating with
minimal thickness of 250μm in accordance
with EN 14901:2014DOWNLOAD SPECIFICATIONS (PDF)
Category: Hydrants
Related products
Above Ground Hydrant DN80 Type ’’МТ-Inx3’’
Features:
• Vertical installation of water or fire installation.
• Automatic discharge after use.
• Surface corrosion protection with externally and
internally applied epoxy coating with minimal
thickness of 250μm in accordance with EN
14901:2014, RAL 3000
• Working pressure PN16.
• Connecting flange in accordance with EN 1092-2.
• Aluminum couplings
DOWNLOAD SPECIFICATIONS (PDF)
Underground Hydrant DN80
Features:
• Design in accordance with EN 1074-6:2008:,
• Body, claw, cap and cone made of ductile ironENGJS-400-15 (GGG40) or EN-GJS-500-7 (GGG50)in
accordance with EN 1563:2011.
• Flange dimensions in accordance with EN 1092-
2:1997
• Hydraulically tested in accordance with EN 12266-
1:2012 with an accredited laboratory issued report.
• Automatic outlet for faster water draining
• Stainless steel spindle fixed with brass nut and
o-rings
• All elastomeric seals for underground hydrants
that come in contact with water are made of EPDM
material (antibacterial rubber) in accordance
with EN 681-1:1996/A3:2005 with an accredited
laboratory issued hygiene certificate.
• Surface corrosion protection with externally and
internally applied epoxy coating with minimal
thickness of 250μm in accordance with
EN 14901:2014
Above Ground Hydrant DN80 Type ’’MT-C2’’
Features:
• Vertical installation of water or fire installation.
• Automatic discharge after use.
• Surface corrosion protection with externally and
internally applied epoxy coating with minimal
thickness of 250μm in accordance with EN 14901:2014
• Working pressure PN16.
• Connecting flange in accordance wirh EN 1092-2.
• Aluminum couplings
DOWNLOAD SPECIFICATIONS (PDF)
Aboveground hydrant DN80 type МТ-INX4 – breakable
Features:
• Vertical installation of water or fire installation.
• Automatic discharge after use.
• Surface corrosion protection with externally and
internally applied epoxy coating with minimal
thickness of 250μm in accordance with EN
14901:2014, RAL 3000
• Working pressure PN16.
• Connecting flange in accordance with EN 1092-2.
• Aluminum couplings