Flexible telescopic dismantling joint type “MDK-FLEX“
• Dimension Range: DN50 to DN600.
• Working Pressure: PN10, PN16 and PN25
• Pressure test in accordance with EN 12266-1:2012
• Flange Drilling: EN 1092-2:1997 оr EN 1092-1:2007+A1:2013
• Epoxy coating surface protection of min 250μm in accordance
withEN 14901:2014 or thermoplastic confirmed with an
accredited laboratory health inspection certificate
• Sealing ring made of EPDM in accordance with EN 681-
1:1996/A3:2005
• Working Pressure: PN10, PN16 and PN25
• Pressure test in accordance with EN 12266-1:2012
• Flange Drilling: EN 1092-2:1997 оr EN 1092-1:2007+A1:2013
• Epoxy coating surface protection of min 250μm in accordance
withEN 14901:2014 or thermoplastic confirmed with an
accredited laboratory health inspection certificate
• Sealing ring made of EPDM in accordance with EN 681-
1:1996/A3:2005
Related products
Rubber Expansion Joint
• Flexible main shell made of EPDM in accordance
with EN 681-1:1996/A3:2005 with inner
reinforcements to provide consistency
• Steel galvanized loose flanges in accordance with
EN 1092-1:2007+A1:2013/AC:2014
• Working Pressure: PN10, PN16.
• Working Pressure: PN10, PN16.
• Available range: DN 50-600.
• Easy to install due to their light weight and
relatively small space requirement.
• Noise and vibrations caused by equipment such as
pumps are absorbed by Rubber Joints.
• Rubber Joints balance thermal movements appear
in any rigid system due to temperature changes.
Dismantling joint type MDK A
• Dimension Range: DN50 to DN2000.
• Working Pressure: PN10, PN16, PN25, PN40
• Pressure test in accordance with EN 12266-1:2012
• Flange Drilling: EN 1092-2:1997 оr EN 1092-
1:2007+A1:2013
• Epoxy paint surface protection of min 250 μm in accordance
with min 250μm according EN 14901:2014 or thermoplastic
confirmed By an accredited laboratory issued health
inspection certificate
• Sealing ring made by EPDM in accordance with EN 681-
1:1996/A3:2005