Steel max flange adapter for large diameters
Features:
• Body and end ring made of hot rolled products of structural
steel ST235JR in accordance with EN 10025-2:2019 оr ductile
iron in accordance with EN 1563:2018
• Flange Adaptors produced in accordance with EN 14525:2004
• Epoxy coating protection in accordance with EN 14901:2014 or
black thermoplastic coating confirmed by health inspection
certificate
• PN10, PN16 working pressure
• Connecting dimensions in accordance with EN 1092-
1:2007+a1:2013/AC:2014 or EN 1092-2:1997
• Equipped with steel zinc coated bolts, nuts and washers
• EPDM rubber seal in accordance with EN 681-1:1996
• High tolerance mechanical pipe fitting
Related products
Steel Max coupling for large diameters
Features:
• Body and end ring made of hot rolled
products of structural steel St235JR in
accordance with EN 10025-2:2019 or ductile
iron in accordance with EN 1563:2018
• Couplings produced in accordance with EN
14525:2004
• Protection with epoxy coating in accordance
with EN 14901:2014 or black thermoplastic
coating confirmed by health inspection
certificate
• PN16 working pressure
• Equipped with steel zinc coated bolts, nuts
and washers
• EPDM rubber seal in accordance with EN
681- 1:1996
• High tolerance mechanical pipe fitings
DOWNLOAD SPECIFICATIONS (PDF)
Flangе adaptor with restrains against pull-out
• For installation on cast iron / ductile, steel, Asbestos cement, PE
and PVC pipes
• Produced in accordance with EN 14525: 2004
• The body, closing ring and clamps made of hot rolled structural
steel ST235JR standard EN 10025-2:2019 or ductile iron in
accordance with EN 1563:2018
• Epoxy paint surface protection of min 250 μm in accordance with
EN 14901:2014 or thermoplastic in black or blue (Rilsan Nylon 11
or equivalent), confirmed by an accredited laboratory issued health
safety report
• Operating pressure PN10, PN16, PN25
• Connecting dimensions in accordance with EN 1092-
1:2007+a1:2013/AC:2014 or EN 1092-2:1997
• Galvanized steel or cast-iron pull-out clamps
• EPDM rubber seal in accordance with the EN 681-1:1996
• A3:2005 with an accredited laboratory issued health safety
certificate
• Angle deviation (deflection) 3°
Tensile Restrained Coupling for HDPE and PVC pipe
Features:
• Body and end ring are made of ductile iron material EN-GJS-500 (GGG
• 50) in accordance with EN 1563:2018
• Couplings for PE and PVC produced in accordance with EN 14525:2004
• Protection by epoxy coating or thermoplastic coating in accordance with
EN 14901:2014 or black color confirmed by health inspection certificate
• PN16 working pressure.
• Equipped with steel zinc plated bolts, nuts and washers
• EPDM rubber seals in accordance with EN 681-1:1996
• High Tolerance mechanical pipe fittings
• Angular deflection +/- 4⁰
DOWNLOAD SPECIFICATIONS (PDF)
Coupling with restrains against pull-out
Code No. АТА 07264
Features
- For installation on cast iron / ductile, steel, Asbestos-cement, PE and PVC pipes
- Produced in accordance with EN 14525: 2004
- The body, closing ring and clamps made of hot rolled structural steel in accordance with EN 10025- 2:2019 or ductile iron in accordance with EN 1563:2018
- Epoxy paint surface protection of min 250 μm in accordance with EN 14901:2014 or black thermoplastic confirmed by an accredited laboratory issued health safety report
- Operating pressure PN10, PN16, PN25
- Galvanized steel or cast-iron pull-out clamps
- EPDM rubber seal in accordance with the EN 681-1:1996 with an accredited laboratory issued health safety certificate
- Angle deviation (deflection) 3°
Strained Flange Adapter for HDPE and PVC pipe
Features:
• Body and end rings are made of
ductile iron material EN- GJS-500
(GGG 50) in accordance with EN
1563:2018 standard
• Flange Adaptоrs produced in
accordance with EN 14525:2004
• Epoxy coating protection in
accordance with EN14901:2014 or
black color thermoplastic coating
confirmed by health inspection
certificate
• PN10, PN16 working pressure.
• Flanges in accordance with
EN1092- 2:1997
• Equipped with steel zinc plated
bolts, nuts and washers
• EPDM rubber seals in accordance
with EN 681-1:1996
• Angular deflection +/- 3.5⁰
DOWNLOAD SPECIFICATIONS (PDF)
Max coupling
Features:
• Body and end ring made of ductile iron
material EN-GJS-500 (GGG 50) in
accordance with EN 1563:2018 standard
(optional body and end caps from hot
rolled structural steel)
• Couplings produced in accordance with
EN 14525:2004
• Protection with epoxy coating or black
thermoplastic coating confirmed by a
health inspection certificate
• PN16 working pressure.
• Equipped with steel zinc coated bolts,
nuts and washers
• EPDM rubber seals in accordance with EN
681- 1:1996
• High Tolerance mechanical pipe fittings.
• Angular deflection +/- 6
DOWNLOAD SPECIFICATIONS (PDF)
Max Flange adaptor
Features:
• Body and end rings are made оf ductile
iron material EN-GJS-500 (GGG 50) in
accordance with EN 1563:2018 standard
(optional body and end cap from hot
rolled structural steel)
• Flange Adaptors are produced in
accordance with EN 14525:2004
• Surface protection by epoxy coating or
black thermoplastic coating confirmed
by health inspection certificate
• PN10, PN16 working pressure.
• Flanges in accordance with EN1092-
2:1997
• Equipped with steel zinc plated bolts,
nuts and washers
• EPDM rubber seals in accordance with
EN 681-1:1996
• High Tolerance mechanical pipe fittings.
• Angular deflection +/- 4⁰
DOWNLOAD SPECIFICATIONS (PDF)