Tensile Restrained Coupling for HDPE and PVC pipe

Категорија Fittings for connection for pipes of various materials

Поврзани продукти

Max coupling

Features: • Body and end ring made of ductile iron material EN-GJS-500 (GGG 50) in accordance with EN 1563:2018 standard (optional body and end caps from hot rolled structural steel) • Couplings produced in accordance with EN 14525:2004 • Protection with epoxy coating or black thermoplastic coating confirmed by a health inspection certificate • PN16 working pressure. • Equipped with steel zinc coated bolts, nuts and washers • EPDM rubber seals in accordance with EN 681- 1:1996 • High Tolerance mechanical pipe fittings. • Angular deflection +/- 6 ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Strained Flange Adapter for HDPE and PVC pipe

Features: • Body and end rings are made of ductile iron material EN- GJS-500 (GGG 50) in accordance with EN 1563:2018 standard • Flange Adaptоrs produced in accordance with EN 14525:2004 • Epoxy coating protection in accordance with EN14901:2014 or black color thermoplastic coating confirmed by health inspection certificate • PN10, PN16 working pressure. • Flanges in accordance with EN1092- 2:1997 • Equipped with steel zinc plated bolts, nuts and washers • EPDM rubber seals in accordance with EN 681-1:1996 • Angular deflection +/- 3.5⁰ ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Steel Max coupling for large diameters

Features: • Body and end ring made of hot rolled products of structural steel St235JR in accordance with EN 10025-2:2019 or ductile iron in accordance with EN 1563:2018 • Couplings produced in accordance with EN 14525:2004 • Protection with epoxy coating in accordance with EN 14901:2014 or black thermoplastic coating confirmed by health inspection certificate • PN16 working pressure • Equipped with steel zinc coated bolts, nuts and washers • EPDM rubber seal in accordance with EN 681- 1:1996 • High tolerance mechanical pipe fitings ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PFF)

ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Flangе adaptor with restrains against pull-out

• For installation on cast iron / ductile, steel, Asbestos cement, PE and PVC pipes • Produced in accordance with EN 14525: 2004 • The body, closing ring and clamps made of hot rolled structural steel ST235JR standard EN 10025-2:2019 or ductile iron in accordance with EN 1563:2018 • Epoxy paint surface protection of min 250 μm in accordance with EN 14901:2014 or thermoplastic in black or blue (Rilsan Nylon 11 or equivalent), confirmed by an accredited laboratory issued health safety report • Operating pressure PN10, PN16, PN25 • Connecting dimensions in accordance with EN 1092- 1:2007+a1:2013/AC:2014 or EN 1092-2:1997 • Galvanized steel or cast-iron pull-out clamps • EPDM rubber seal in accordance with the EN 681-1:1996 • A3:2005 with an accredited laboratory issued health safety certificate • Angle deviation (deflection) 3°

Steel max flange adapter for large diameters

Features: • Body and end ring made of hot rolled products of structural steel ST235JR in accordance with EN 10025-2:2019 оr ductile iron in accordance with EN 1563:2018 • Flange Adaptors produced in accordance with EN 14525:2004 • Epoxy coating protection in accordance with EN 14901:2014 or black thermoplastic coating confirmed by health inspection certificate • PN10, PN16 working pressure • Connecting dimensions in accordance with EN 1092- 1:2007+a1:2013/AC:2014 or EN 1092-2:1997 • Equipped with steel zinc coated bolts, nuts and washers • EPDM rubber seal in accordance with EN 681-1:1996 • High tolerance mechanical pipe fitting ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Max Flange adaptor

Features: • Body and end rings are made оf ductile iron material EN-GJS-500 (GGG 50) in accordance with EN 1563:2018 standard (optional body and end cap from hot rolled structural steel) • Flange Adaptors are produced in accordance with EN 14525:2004 • Surface protection by epoxy coating or black thermoplastic coating confirmed by health inspection certificate • PN10, PN16 working pressure. • Flanges in accordance with EN1092- 2:1997 • Equipped with steel zinc plated bolts, nuts and washers • EPDM rubber seals in accordance with EN 681-1:1996 • High Tolerance mechanical pipe fittings. • Angular deflection +/- 4⁰ ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Coupling with restrains against pull-out

Code No. АТА 07264

Features

For installation on cast iron / ductile, steel, Asbestos-cement, PE and PVC pipes
Produced in accordance with EN 14525: 2004
The body, closing ring and clamps made of hot rolled structural steel in accordance with EN 10025- 2:2019 or ductile iron in accordance with EN 1563:2018
Epoxy paint surface protection of min 250 μm in accordance with EN 14901:2014 or black thermoplastic confirmed by an accredited laboratory issued health safety report
Operating pressure PN10, PN16, PN25
Galvanized steel or cast-iron pull-out clamps
EPDM rubber seal in accordance with the EN 681-1:1996 with an accredited laboratory issued health safety certificate
Angle deviation (deflection) 3°

ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)