Universal tapping bridge for tapping at full operating pressure
Features
• For installation on cast-iron, ductile, steel and asbestos cement pipes
• For horizontal or vertical installation
• Operating pressure PN16 bar, hydraulically tested in accordance with EN12266-1: 2012
• Body made of ductile iron EN-GJS-500-7 in accordance with EN 1563:2018
• Epoxy paint surface protection of min 250μm in accordance with EN 14901:2014 or
thermoplastic confirmed with an accredited laboratory issued health inspection certificate
• EPDM rubber seals in accordance with EN 681-1:1996/A3:2005 confirmed with an accredited
laboratory issued health inspection certificate
• Connector with internal female thread G1”, G1½” and G2” in accordance with EN 10226-
1:2004
• Additional material coupled with connection to PE hose min. Ø32 made of brass. The thread
of the additional material is in accordance with the ICC EN 10226-1:2004 and is designed for
working pressure of 16 bar
• Telescopic extension spindle with ranges from 0,7 m to 2,5 m made of PVC and galvanized
steel with epoxy protected coupling elements
• Belt, rods, washers and nuts made of X5CrNi18-10
DOWNLOAD SPECIFICATIONS (PDF)
Two part tapping saddle for PE-PVC pipes for tapping at full operating pressure
Features
• For installation on PE and PVC pipes
• For horizontal or vertical installation
• Operating pressure PN16 bar, hydraulically tested in accordance with EN12266-1: 2012
• Body made of ductile iron EN-GJS-500-7 in accordance with EN 1563:2018
• Epoxy paint surface protection of min 250μm in accordance with EN 14901:2014 or
thermoplastic confirmed by an accredited laboratory issued health inspection certificate
EPDM rubber seals in accordance with EN 681-1:1996/A3:2005 confirmed with an
accredited laboratory issued health inspection certificate
• Connector with internal female thread G1”, G1½” and G2” in accordance with EN 10226-
1:2004
• Additional material coupled with connection to PE hose min. Ø32 made of brass. The thread
of the additional material is in accordance with the ICC EN 10226-1:2004 and is designed
for a working pressure of 16 bar
• Telescopic extension spindle with ranges from 0,7 m to 2,5 m made of PVC and galvanized
steel with epoxy protected or galvanized coupling elements
DOWNLOAD SPECIFICATIONS (PDF)
Telescopic service spindle
Features
• Allows valve opening and closing
• Easy to install without special tools
• Protection against dirt
• Adjustable in any position within the
range, and self-holding
• The protective tube, cap and clutch
between the telescopic parts are
integrated in a stable assembly
• With ranges from 0,7 to 2,5 m
DOWNLOAD SPECIFICATIONS (PDF)