Steel Max coupling for large diameters
Features:
• Body and end ring made of hot rolled
products of structural steel St235JR in
accordance with EN 10025-2:2019 or ductile
iron in accordance with EN 1563:2018
• Couplings produced in accordance with EN
14525:2004
• Protection with epoxy coating in accordance
with EN 14901:2014 or black thermoplastic
coating confirmed by health inspection
certificate
• PN16 working pressure
• Equipped with steel zinc coated bolts, nuts
and washers
• EPDM rubber seal in accordance with EN
681- 1:1996
• High tolerance mechanical pipe fitings
DOWNLOAD SPECIFICATIONS (PDF)
Steel max flange adapter for large diameters
Features:
• Body and end ring made of hot rolled products of structural
steel ST235JR in accordance with EN 10025-2:2019 оr ductile
iron in accordance with EN 1563:2018
• Flange Adaptors produced in accordance with EN 14525:2004
• Epoxy coating protection in accordance with EN 14901:2014 or
black thermoplastic coating confirmed by health inspection
certificate
• PN10, PN16 working pressure
• Connecting dimensions in accordance with EN 1092-
1:2007+a1:2013/AC:2014 or EN 1092-2:1997
• Equipped with steel zinc coated bolts, nuts and washers
• EPDM rubber seal in accordance with EN 681-1:1996
• High tolerance mechanical pipe fitting
DOWNLOAD SPECIFICATIONS (PDF)
Strained Flange Adapter for HDPE and PVC pipe
Features:
• Body and end rings are made of
ductile iron material EN- GJS-500
(GGG 50) in accordance with EN
1563:2018 standard
• Flange Adaptоrs produced in
accordance with EN 14525:2004
• Epoxy coating protection in
accordance with EN14901:2014 or
black color thermoplastic coating
confirmed by health inspection
certificate
• PN10, PN16 working pressure.
• Flanges in accordance with
EN1092- 2:1997
• Equipped with steel zinc plated
bolts, nuts and washers
• EPDM rubber seals in accordance
with EN 681-1:1996
• Angular deflection +/- 3.5⁰
DOWNLOAD SPECIFICATIONS (PDF)
Swing check valve
Features
• Rubber encapsulated disc.
• Suitable for both horizontal and vertical
installation.
• Working Pressure: PN10, PN16.
• Available range: DN 50-300.
• Epoxy coated from the inside and outside,
min 250 μm in accordance with
EN 14901:2014
• Product color: Blue RAL 5005.
DOWNLOAD SPECIFICATIONS (PDF)
Telescopic service spindle
Features
• Allows valve opening and closing
• Easy to install without special tools
• Protection against dirt
• Adjustable in any position within the
range, and self-holding
• The protective tube, cap and clutch
between the telescopic parts are
integrated in a stable assembly
• With ranges from 0,7 to 2,5 m
DOWNLOAD SPECIFICATIONS (PDF)
Tensile Restrained Coupling for HDPE and PVC pipe
Features:
• Body and end ring are made of ductile iron material EN-GJS-500 (GGG
• 50) in accordance with EN 1563:2018
• Couplings for PE and PVC produced in accordance with EN 14525:2004
• Protection by epoxy coating or thermoplastic coating in accordance with
EN 14901:2014 or black color confirmed by health inspection certificate
• PN16 working pressure.
• Equipped with steel zinc plated bolts, nuts and washers
• EPDM rubber seals in accordance with EN 681-1:1996
• High Tolerance mechanical pipe fittings
• Angular deflection +/- 4⁰
DOWNLOAD SPECIFICATIONS (PDF)
Two part tapping saddle for PE-PVC pipes for tapping at full operating pressure
Features
• For installation on PE and PVC pipes
• For horizontal or vertical installation
• Operating pressure PN16 bar, hydraulically tested in accordance with EN12266-1: 2012
• Body made of ductile iron EN-GJS-500-7 in accordance with EN 1563:2018
• Epoxy paint surface protection of min 250μm in accordance with EN 14901:2014 or
thermoplastic confirmed by an accredited laboratory issued health inspection certificate
EPDM rubber seals in accordance with EN 681-1:1996/A3:2005 confirmed with an
accredited laboratory issued health inspection certificate
• Connector with internal female thread G1”, G1½” and G2” in accordance with EN 10226-
1:2004
• Additional material coupled with connection to PE hose min. Ø32 made of brass. The thread
of the additional material is in accordance with the ICC EN 10226-1:2004 and is designed
for a working pressure of 16 bar
• Telescopic extension spindle with ranges from 0,7 m to 2,5 m made of PVC and galvanized
steel with epoxy protected or galvanized coupling elements
DOWNLOAD SPECIFICATIONS (PDF)