Прикажувам 37–48 од 61 резултати

Прикажи 9 24 36

Repair clamp Type DI

Product characteristics

Repair clamps are flexible clamps composed of one, two or three stainless steel parts with ductile iron clamps attached to their ends with bolts and nuts for tightening. They are intended for easy, fast and permanent repair of corroded or damaged water pipes. The central bolt is with extended length for easier installation in difficult conditions. Working pressure PN10/16.

Material

  • Body and side plates made of stainless steel 1.4301 (AISI 304)
  • Clamps of ductile iron in accordance with EN 1563:2018
  • Surface protection of clamps with epoxy paint or black thermoplastic confirmed by an accredited laboratory issued health safety report
  • EPDM rubber seal in accordance with the EN 681 -1:1996/A1:1998 with an accredited laboratory issued health safety certificate
  • Screws, nuts and washers – Stainless steel (Class A21A4)

Field of application

  • Above the ground installation.
  • Underground installation.
ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Repair clamp Type S

Product characteristics Repair clamps are flexible clamps made of one or two stainless steel parts wrapped with rubber gasket. They are intended for easy, fast and permanent repair of corroded or damaged water pipes. The single band repair clamps are with tolerance of 10mm, whereas the double band repair clams have 20mm tolerance. Material • Body and bands – stainless steel • Rubber gasket – EPDM or NBR • Nuts, bolts and washers – stainless steel Field of application • Above ground installation. • Underground installation ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Resilient Seated Gate Valve – F5

Features: • Replaceable O-rings • Low torque operation • Rubber encapsulated wedge (optional wedge with integrated sliders). • Clockwise closing direction • Epoxy coating protection in accordance with EN 14901:2014 confirmed by health inspection certificate • Product color: Blue RAL 5005 • Maximum temperature: 80°C ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Resilient seated gate valve F4

Features

  • Replaceable O-rings
  • Rubber encapsulated wedge (optional wedge with integrated sliders)
  • Clockwise closing direction
  • Epoxy coating protection in accordance with EN 14901:2014 confirmed by health inspection certificate
  • Product color: Blue RAL 5005
  • Maximum temperature: 80°C
ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Rubber Expansion Joint

• Flexible main shell made of EPDM in accordance with EN 681-1:1996/A3:2005 with inner reinforcements to provide consistency • Steel galvanized loose flanges in accordance with EN 1092-1:2007+A1:2013/AC:2014 • Working Pressure: PN10, PN16. • Working Pressure: PN10, PN16. • Available range: DN 50-600. • Easy to install due to their light weight and relatively small space requirement. • Noise and vibrations caused by equipment such as pumps are absorbed by Rubber Joints. • Rubber Joints balance thermal movements appear in any rigid system due to temperature changes. ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Single chamber air valve

Features • Design: EN 1074-4:2000 • Available range of DN sizes DN 50 to DN 100. • Epoxy coated from the inside and outside, min 250 μm in accordance with EN 14901:2014 • Product color: Blue RAL 5005. • Working pressure PN10 and PN16 ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Sluice gates Penstocks

Features • Purpose: Wastewater treatment and mini hydro power plants. • Made in accordance with EN 1085:2007 • Three or four side sealing • Manual board lifting (option with hydraulic drive) • Material: Frame: Stainless steel in accordance with EN1.4301/X5CrNi 18-10 AISI 304 • Table: Hot rolled structural steel in accordance with EN 10025-2:2004 (option stainless steel in accordance with EN1.4301/X5CrNi 18-10 AISI 304) Stem: Stainless steel in accordance with EN 1.4301/X5CrNi 18-10 AISI 304 or hydraulic cylinder with clip material C45E (1.991) in accordance with EN10277- 5:2008 Sealing tape: Hot roller structural in accordance with EN 10025-2:2004 or stainless steel in accordance with EN 1.4301/X5CrNi 18-10 AISI 304 • Seal: EPDM rubber in accordance with EN 681-1:1996/AC:2002 • Surface protection by materials made of hot rolled structural steel with epoxy or polyurethane color ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Steel Max coupling for large diameters

Features: • Body and end ring made of hot rolled products of structural steel St235JR in accordance with EN 10025-2:2019 or ductile iron in accordance with EN 1563:2018 • Couplings produced in accordance with EN 14525:2004 • Protection with epoxy coating in accordance with EN 14901:2014 or black thermoplastic coating confirmed by health inspection certificate • PN16 working pressure • Equipped with steel zinc coated bolts, nuts and washers • EPDM rubber seal in accordance with EN 681- 1:1996 • High tolerance mechanical pipe fitings ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PFF)

Steel max flange adapter for large diameters

Features: • Body and end ring made of hot rolled products of structural steel ST235JR in accordance with EN 10025-2:2019 оr ductile iron in accordance with EN 1563:2018 • Flange Adaptors produced in accordance with EN 14525:2004 • Epoxy coating protection in accordance with EN 14901:2014 or black thermoplastic coating confirmed by health inspection certificate • PN10, PN16 working pressure • Connecting dimensions in accordance with EN 1092- 1:2007+a1:2013/AC:2014 or EN 1092-2:1997 • Equipped with steel zinc coated bolts, nuts and washers • EPDM rubber seal in accordance with EN 681-1:1996 • High tolerance mechanical pipe fitting ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Strained Flange Adapter for HDPE and PVC pipe

Features: • Body and end rings are made of ductile iron material EN- GJS-500 (GGG 50) in accordance with EN 1563:2018 standard • Flange Adaptоrs produced in accordance with EN 14525:2004 • Epoxy coating protection in accordance with EN14901:2014 or black color thermoplastic coating confirmed by health inspection certificate • PN10, PN16 working pressure. • Flanges in accordance with EN1092- 2:1997 • Equipped with steel zinc plated bolts, nuts and washers • EPDM rubber seals in accordance with EN 681-1:1996 • Angular deflection +/- 3.5⁰ ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)