Прикажувам 49–60 од 61 резултати

Прикажи 9 24 36

Swing check valve

Features • Rubber encapsulated disc. • Suitable for both horizontal and vertical installation. • Working Pressure: PN10, PN16. • Available range: DN 50-300. • Epoxy coated from the inside and outside, min 250 μm in accordance with EN 14901:2014 • Product color: Blue RAL 5005. ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Telescopic service spindle

Features • Allows valve opening and closing • Easy to install without special tools • Protection against dirt • Adjustable in any position within the range, and self-holding • The protective tube, cap and clutch between the telescopic parts are integrated in a stable assembly • With ranges from 0,7 to 2,5 m ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Tensile Restrained Coupling for HDPE and PVC pipe

Features: • Body and end ring are made of ductile iron material EN-GJS-500 (GGG • 50) in accordance with EN 1563:2018 • Couplings for PE and PVC produced in accordance with EN 14525:2004 • Protection by epoxy coating or thermoplastic coating in accordance with EN 14901:2014 or black color confirmed by health inspection certificate • PN16 working pressure. • Equipped with steel zinc plated bolts, nuts and washers • EPDM rubber seals in accordance with EN 681-1:1996 • High Tolerance mechanical pipe fittings • Angular deflection +/- 4⁰ ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Two part tapping saddle for PE-PVC pipes for tapping at full operating pressure

Features • For installation on PE and PVC pipes • For horizontal or vertical installation • Operating pressure PN16 bar, hydraulically tested in accordance with EN12266-1: 2012 • Body made of ductile iron EN-GJS-500-7 in accordance with EN 1563:2018 • Epoxy paint surface protection of min 250μm in accordance with EN 14901:2014 or thermoplastic confirmed by an accredited laboratory issued health inspection certificate EPDM rubber seals in accordance with EN 681-1:1996/A3:2005 confirmed with an accredited laboratory issued health inspection certificate • Connector with internal female thread G1”, G1½” and G2” in accordance with EN 10226- 1:2004 • Additional material coupled with connection to PE hose min. Ø32 made of brass. The thread of the additional material is in accordance with the ICC EN 10226-1:2004 and is designed for a working pressure of 16 bar • Telescopic extension spindle with ranges from 0,7 m to 2,5 m made of PVC and galvanized steel with epoxy protected or galvanized coupling elements ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Underground Hydrant DN80

Features: • Design in accordance with EN 1074-6:2008:, • Body, claw, cap and cone made of ductile ironENGJS-400-15 (GGG40) or EN-GJS-500-7 (GGG50)in accordance with EN 1563:2011. • Flange dimensions in accordance with EN 1092- 2:1997 • Hydraulically tested in accordance with EN 12266- 1:2012 with an accredited laboratory issued report. • Automatic outlet for faster water draining • Stainless steel spindle fixed with brass nut and o-rings • All elastomeric seals for underground hydrants that come in contact with water are made of EPDM material (antibacterial rubber) in accordance with EN 681-1:1996/A3:2005 with an accredited laboratory issued hygiene certificate. • Surface corrosion protection with externally and internally applied epoxy coating with minimal thickness of 250μm in accordance with EN 14901:2014 ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Underground Hydrant DN80 Type “ATA-T2”

Features: • Design in accordance with EN 1074- 6:2008:, • Body, claw, cap and cone made of ductile iron EN-GJS-400-15 (GGG40) or EN-GJS-500-7 (GGG50) in accordance with EN 1563:2011. • Flange dimensions in accordance with EN 1092-2:1997 • Hydraulically tested in accordance with EN 12266-1:2012 with an accredited laboratory issued report. • With ball safety system for automatic closing and single or double automatic outlet for faster water draining • Stainless steel spindle fixed with brass nut and o-rings • All elastomeric seals for underground hydrants that come in contact with water are made of EPDM material (antibacterial rubber) in accordance with EN 681-1:1996/A3:2005 with an accredited laboratory issued hygiene certificate. • Surface corrosion protection with externally and internally applied epoxy coating with minimal thickness of 250μm in accordance with EN 14901:2014 ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Universal tapping bridge for tapping at full operating pressure

 Features • For installation on cast-iron, ductile, steel and asbestos cement pipes • For horizontal or vertical installation • Operating pressure PN16 bar, hydraulically tested in accordance with EN12266-1: 2012 • Body made of ductile iron EN-GJS-500-7 in accordance with EN 1563:2018 • Epoxy paint surface protection of min 250μm in accordance with EN 14901:2014 or thermoplastic confirmed with an accredited laboratory issued health inspection certificate • EPDM rubber seals in accordance with EN 681-1:1996/A3:2005 confirmed with an accredited laboratory issued health inspection certificate • Connector with internal female thread G1”, G1½” and G2” in accordance with EN 10226- 1:2004 • Additional material coupled with connection to PE hose min. Ø32 made of brass. The thread of the additional material is in accordance with the ICC EN 10226-1:2004 and is designed for working pressure of 16 bar • Telescopic extension spindle with ranges from 0,7 m to 2,5 m made of PVC and galvanized steel with epoxy protected coupling elements • Belt, rods, washers and nuts made of X5CrNi18-10 ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

Wall sleeve flange Split puddle flange

Features • Made from constructive steel min. St235JR • For welding or installation on pipes that pass through concrete walls • Strengthens and fixes the pipe • Per request, wall flanges can be made up to DN1600 ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)

XR – Tapers flange

Features: • The pressure reducing flange allows for substantial reduction of the nominal diameter and is very practical because of its overall short length • Dimensions in accordance with EN 1092-1:2007+A1:2013/AC:2014 • Material: steel S235JR • Zinc plated bolts in accordance to DIN975 • Working pressure: PN10 and PN16. • Epoxy paint surface protection of min 250μm or thermoplastic confirmed by an accredited laboratory issued health inspection certificate ПРЕЗЕМИ СПЕЦИФИКАЦИИ (PDF)